Home Technology Mechanics How to start a car with battery cables ?

How to start a car with battery cables ?

How to start a car with battery cables ?

If your battery is dead and that you have another car and battery jumper cables under the hand, follow this tutorial:


1. Leave the car in good condition switched on during all the operation.

This will avoid to unload its battery.


2. Connect the red cable on the positive pod (+) of the battery(drum kit) in good condition then the other extremity of the cable on the positive pod (+) of the battery(drum kit) to be started.


3. Connect the black cable on the negative pod (-) of the battery in good condition then the other extremity of the cable on the negative pod (-) of the battery to be started.


4. Let turn during 1 minute.

This so that the dead battery fills enough to undergo the discharge when attempting to start the engine.


5. Start the engine of the car to be started.

If the car does not start, wait a little bit longer.


6. Disconnect the black cable of the car which we have just started then the extremity situated on the car-tow truck.